Reduce mixing errors through product identification, packaging selection, opened-container records and point-of-use control.
Link inventory identity to intended use
Recording different thinners simply as solvent invites selection errors. Include product code, approved coating pairing and intended use in inventory records. Make cleaning and reduction products operationally distinct and do not accept missing identification.
Choose packaging for the consumption pattern
A larger container is not automatically more efficient. Assess use frequency after opening, decanting and measurement facilities. Confirm current packaging availability during quotation; inventory planning should consider more than nominal volume.
Maintain traceability at the point of use
A correctly labelled stock item that loses identity in a working container breaks the control chain. Use suitable containers and retain identification during transfer. Manage unknown remnants through a defined procedure rather than returning them to original stock and contaminating later batches.
Technical framework: from substrate to system
Thinner is a process component that influences application behaviour. Selection should not rely on smell, container colour or broad labels such as synthetic or nitrocellulose. Use the exact coating code, application method and manufacturer's approved reducer. A solvent used to clean equipment may be unsuitable for addition to the coating; cleaning and formulation reduction are separate operations.
Increasing dilution simply to improve spray flow can change film build, hiding and surface formation. Viscosity readings cannot be compared without knowing the method, temperature and instrument. For two-component coatings, verify the correct base and hardener and the specified mixing basis first. Thinner cannot correct an unsuitable hardener or restore a mixture that has exceeded its working life.
Start this assessment with the Thinners and Auxiliaries range and refer to the coatings glossary for terminology.
Example project scenario
Where three coating lines share a solvent store, do not organise it by container size alone. Make approved pairings visible and use consistent codes in purchasing and issue records. Track opened containers. Training, labelling and job instructions together provide a more consistent process than reliance on operator memory.
Checks before making the decision
- Inventory: use exact product codes rather than generic solvent names.
- Packaging: consider use frequency and decanting requirements.
- Labels: retain product identity in working containers.
- Remnants: do not combine unidentified material with clean stock.
Relevant products and system components
These records support comparison and technical discussion. Listing them together does not constitute an approved application system for every condition. Follow the links for packaging, technical scope and product-specific questions.
Nanomix Synthetic Thinner
Synthetic Thinner is an auxiliary product developed to adjust the application viscosity of the corresponding coating system in a controlled manner and support professional application quality.
Application scope: Thinning the relevant Nanomix paint, primer or varnish systems; equipment cleaning where expressly specified as suitable.
Nanomix Nitrocellulose Thinner
Nitrocellulose Thinner is an auxiliary product developed to adjust the application viscosity of the corresponding coating system in a controlled manner and support professional application quality.
Application scope: Thinning the relevant Nanomix paint, primer or varnish systems; equipment cleaning where expressly specified as suitable.
Nanomix Quick-Drying Industrial Thinner
Quick-Drying Industrial Thinner is an auxiliary product developed to adjust the application viscosity of the corresponding coating system in a controlled manner and support professional application quality.
Application scope: Thinning the relevant Nanomix paint, primer or varnish systems; equipment cleaning where expressly specified as suitable.
Nanomix Cleaning Thinner
Cleaning Thinner is a solvent-based auxiliary product for removing oil and dirt from metal surfaces before coating.
Application scope: Removal of oil and dirt from metal surfaces before coating. Suitability for thinning paint must be confirmed separately.
Application, acceptance and maintenance planning
Product labels and safety data sheets are the starting point for solvent management. Define ventilation, ignition-source control, personal protection, spill response and waste collection before work begins. Never transfer solvents into beverage containers; working containers must retain product identity and purpose. Do not combine recovered solvents from different processes into an unidentified general-purpose reducer.
A dry-looking surface does not establish that cleaning is complete. Residues and recontamination can affect the next coating layer. When changing a cleaning or dilution procedure, a small controlled trial with recorded comparisons helps isolate the cause without exposing an entire production batch.
Preparing a technical enquiry and quotation request
Before contacting the technical team, prepare overall and close-up photographs. Identify substrate, any previous product, area or component count, colour and appearance requirements. State the application location, equipment and required completion date. Flag chemical contact, continuous immersion, food-related use or any other condition requiring specific documentation at the beginning of the enquiry.
Request separate identification of primers, finishes and auxiliaries alongside exact product codes. List unresolved technical values as items requiring written confirmation instead of filling them with assumptions. Keeping the approved sample, current technical data sheet and application records together allows purchasing and production to work from the same decision. Packaging information supports ordering, but product-page options do not represent live stock or a guaranteed delivery date.
Send your project details through the quotation request form or discuss unresolved questions with the Versan Boya team.
Frequently asked questions
Are 3 L, 10 L and 12 L options always in stock?
These sizes reflect the business-supplied thinner packaging profile, not a live stock guarantee. Confirm options and availability for the specific product during quotation. A packaging listing is not real-time inventory information.
Can leftover thinners be combined?
Do not combine materials with unverified composition and use. The result becomes an unidentified product for the next operation. Separate identification and handling under the relevant safety information preserve traceability.
Sources and technical scope
This article is based on Versan Boya product records, the site's technical descriptions and available archived Nanomix catalogue documents. An archived document does not replace a current technical data sheet. Confirm numerical application values, system compatibility and special-use approvals for the selected product before ordering. The scenario is illustrative and is not presented as a completed customer project or a performance test.
Editorial archive date: 19 December 2025. This new content was prepared and updated on 25 September 2026. Archive ordering does not imply that the article was previously published.
Explore the subject further
- Choosing the Correct Thinner: Epoxy, Polyurethane, Acrylic and Synthetic Systems
- Paint Dilution: Managing Viscosity, Hiding and Film Build Together
- Cleaning Coating Equipment: Solvents, Residues and Product Changeovers
- Two-Component Paint Mixing: Distinguishing Hardener from Thinner
Related technical publication: Industrial Coating Defects and Quality Control: A Diagnostic Guide for Metal Surfaces.