Cleaning Thinner is a solvent-based auxiliary product for removing oil and dirt from metal surfaces before coating. Listed applications: Removal of oil and dirt from metal surfaces before coating. Suitability for thinning paint must be confirmed separately.

Cleaning thinner is considered for removing oil and contamination from metal surfaces. Do not assume that it serves the same function as a paint thinner; check compatibility with the substrate and any existing finish. Use a cleaning procedure that does not transfer contamination back onto the surface. Confirm the surface condition before coating and test a small area on sensitive substrates.

Before specifying the product, provide the technical team with the substrate, existing finish, service exposure and intended application method. A representative trial helps establish adhesion and appearance; it does not replace the required system approval for demanding exposure. Cleaning thinner should not be presented as a rust remover, disinfectant or universal cleaner for plastics. Plan enclosed-space work and handling of waste and contaminated cleaning materials using the safety data sheet.

The product record lists: Solvent blend formulated for the system. Preparation information: Refer to the technical data sheet for the matching product.

Cleaning thinner is not an additive to paint unless an approved instruction explicitly specifies that use. Do not mix it with other cleaning chemicals; choose the method from the technical and safety documentation.

Match the auxiliary product code to the approved operation before dispensing. Use the stated weight or volume basis, suitable measuring equipment and the documented order of addition. Carry out a small-scale compatibility or cleaning trial where required. Do not substitute another thinner, binder or hardener solely because its name or appearance is similar.

The quotation packaging preferences are: 3 L tin; 10 L tin; 12 L tin. Confirm the selected pack, colour and availability at quotation stage. Kilograms describe net mass and litres describe net volume; conversion requires the density of the supplied product.

This is an auxiliary material or formulation component. Plan its quantity from the approved base-product formulation, cleaning process or addition rate, rather than treating it as a standalone coating with a square-metre spreading rate. Include the actual production or cleaning workload in the calculation.

Record actual consumption during a representative production or cleaning trial, then scale it to the planned workload. Avoid treating an estimated addition rate as a universal recipe. Confirm whether the purchase concerns an individual component or a complete set. Keep material in its original labelled container and follow the technical and safety documentation for storage.

An auxiliary product does not have the same drying or service-readiness criteria as a completed coating. Use the approved base-product process, evaporation requirements or reaction schedule to plan the next operation.

A thinner does not have an independent coating-film drying time or coverage area. Monitor the base coating's viscosity, film formation and drying conditions together; adding thinner is not a way to accelerate curing.

Measure site conditions rather than relying only on the weather forecast. Substrate temperature, moisture, ventilation and the actual applied thickness can change the result. Obtain product-specific application limits and recoat instructions before work begins; do not copy temperature limits from a different resin family. Consult the safety data sheet for ventilation and handling requirements.

Assess the complete sequence, including preparation, any primer or intermediate coat, the specified product and associated auxiliary materials. The related links on this page are options for technical assessment; a shared brand or resin-family name is not proof of compatibility.

The linked archive includes an entry for this product. It is a reference for planning, not a replacement for the current batch-specific technical data sheet. The download identifies the original catalogue page numbers. No publication date or revision is specified in the supplied source, so the website review date must not be read as a manufacturer document issue date.

Request the current technical and safety data sheets using the product code and intended application. Resolve any missing mixing ratio, recoat interval, exposure limitation or document discrepancy before use. The application guide supports planning and inspection; it does not establish a certified resistance class or replace a project-specific coating specification.