Textured Silicone Exterior Paint is a Nanomix coating solution developed to combine protection, an attractive finish and professional application performance on selected surfaces. Listed applications: Render, concrete, aerated concrete and similar mineral exterior surfaces.

For façades, assess render integrity, absorbency, the previous coating and exposure to rain and sunlight together. Smooth and textured finishes differ in application method and consumption as well as appearance. Remove loose layers and contamination and equalise absorbency at repaired areas. Investigate active cracks and water ingress first. Paint is not a substitute for resolving a waterproofing defect.

Before specifying the product, provide the technical team with the substrate, existing finish, service exposure and intended application method. A representative trial helps establish adhesion and appearance; it does not replace the required system approval for demanding exposure. Water-vapour permeability, water repellency and elasticity are different properties. Where crack-bridging classification or approval within a façade system is needed, verify it against the relevant technical documentation.

The product record lists: Water-based resin system. Preparation information: Refer to the current technical data sheet.

Dilute with water only where the product's water-based formulation and data sheet call for it. First- and subsequent-coat ratios may differ. Do not add arbitrary binders or additives in an attempt to increase hiding power.

Measure any permitted water addition rather than judging consistency by eye. Keep dilution consistent across adjacent areas and record differences between first- and second-coat instructions. Ready-to-use fillers or decorative materials must not be diluted simply because a related wall paint allows it. Prepare a sample to check texture, hiding and tool marks before treating the full surface.

The quotation packaging preferences are: 2.5 L pail; 7.5 L pail; 12.5 L pail; 15 L pail. Confirm the selected pack, colour and availability at quotation stage. Kilograms describe net mass and litres describe net volume; conversion requires the density of the supplied product.

The product record lists: theoretical coverage — Dependent on substrate and application method; refer to the current technical data sheet. This is not a guaranteed site yield. Check whether the value refers to one coat, a specified film thickness, the mixed kit or the base component. Account for substrate texture, absorbency, application losses and the required number of coats.

Measure the actual area, include the specified coat sequence and use a representative trial to refine the purchase quantity. Match colour and batch information for adjoining surfaces. Keep unused material in its original labelled packaging and follow the product storage instructions; pack size does not establish shelf life or storage temperature limits.

The product record lists: drying information — Dependent on conditions, substrate and film thickness; refer to the current technical data sheet. Confirm the reference temperature, film thickness and test conditions before using these values in a production schedule.

Plan weather conditions for application and early drying together. Consider rain risk, strong sunshine, wind and substrate temperature; do not extrapolate drying times outside the data sheet limits.

Measure site conditions rather than relying only on the weather forecast. Substrate temperature, moisture, ventilation and the actual applied thickness can change the result. Obtain product-specific application limits and recoat instructions before work begins; do not copy temperature limits from a different resin family. Consult the safety data sheet for ventilation and handling requirements.

Assess the complete sequence, including preparation, any primer or intermediate coat, the specified product and associated auxiliary materials. The related links on this page are options for technical assessment; a shared brand or resin-family name is not proof of compatibility.

The linked archive includes an entry for this product. It is a reference for planning, not a replacement for the current batch-specific technical data sheet. The download identifies the original catalogue page numbers. No publication date or revision is specified in the supplied source, so the website review date must not be read as a manufacturer document issue date.

Request the current technical and safety data sheets using the product code and intended application. Resolve any missing mixing ratio, recoat interval, exposure limitation or document discrepancy before use. The application guide supports planning and inspection; it does not establish a certified resistance class or replace a project-specific coating specification.