Skip to main content
Nanomix Exposed Concrete Primer product packaging
Versan
coating system
Exterior Coating Systems

Exposed Concrete Primer

Stock code
NMX-EXT-002

Exposed Concrete Primer is a professional primer that promotes more uniform topcoat adhesion and provides a controlled foundation for the coating system.

  • A strong foundation for adhesion
  • A uniform base for the topcoat
  • Support for system performance
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

When selected to match surface absorbency, adhesion and corrosion protection requirements, it helps establish more consistent topcoat performance. Compatibility with the overcoating system must be verified before application.

Areas of use

New or previously painted mineral building surfaces and absorbent substrates specified for the product.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeWater-based primer system
FinishSystem component
Recommended substrateMineral building substrates
ApplicationBrush, roller or spray
Thinning / mixingRefer to the current technical data sheet
DryingDependent on conditions, substrate and film thickness; refer to the current technical data sheet
Theoretical coverageDependent on substrate and application method; refer to the current technical data sheet
Application control

Reliable results begin
with a controlled process.

Remove grease, rust, dust, loose material and residual old paint, then apply using an appropriate method to achieve a uniform film.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.