Skip to main content
Nanomix Matt Acrylic Exterior Paint product packaging
Versan
coating system
Exterior Coating Systems

Matt Acrylic Exterior Paint

Stock code
NMX-EXT-001

Matt Acrylic Exterior Paint is a Nanomix coating solution developed to combine protection, an attractive finish and professional application performance on selected surfaces.

  • Consistent film formation
  • Surface protection
  • A professional final finish
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

When surface preparation, primer selection, ambient conditions and the recommended coating build are managed together, it delivers a uniform appearance and film performance appropriate to the intended use.

Areas of use

Render, concrete, aerated concrete and similar mineral exterior surfaces.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeWater-based resin system
FinishMatt
Recommended substrateMineral building substrates
ApplicationBrush, roller or suitable decorative application tools
Thinning / mixingRefer to the current technical data sheet
DryingDependent on conditions, substrate and film thickness; refer to the current technical data sheet
Theoretical coverageDependent on substrate and application method; refer to the current technical data sheet
Application control

Reliable results begin
with a controlled process.

Apply to a sound, clean, dry and properly prepared surface using a compatible primer and thinner, observing the recommended recoating intervals.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.