Skip to main content
Nanomix Polyurethane Hardener packaging
Versan
coating system
Binders and Ancillary Products

Polyurethane Hardener

Stock code
NMX-AUX-007

Polyurethane Hardener is a system component developed to complete the reaction and film performance of compatible two-component Nanomix systems.

  • Controlled curing
  • System performance
  • Consistent film formation
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

When used with the appropriate product at the mixing ratio specified in the technical data sheet, it supports consistent curing, surface durability and application reliability.

Areas of use

Matching two-component topcoat, primer or varnish systems.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeReactive system component
FinishSystem component
Recommended substrateMatching two-component system
ApplicationLow-speed mechanical mixer
Thinning / mixingRefer to the current technical data sheet
DryingDependent on conditions, substrate and film thickness; refer to the current technical data sheet
Theoretical coverageDependent on substrate and application method; refer to the current technical data sheet
Application control

Reliable results begin
with a controlled process.

Combine with the base component only at the ratio and in the mixing sequence specified in the current technical data sheet. Use within the stated pot life.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.