Skip to main content
Nanomix Nitrocellulose Paint Binder packaging
Versan
coating system
Binders and Ancillary Products

Nitrocellulose Paint Binder

Stock code
NMX-AUX-005

Nitrocellulose Paint Binder is a resin-based binder component used to control film formation and system characteristics in professional paint formulations.

  • Formulation flexibility
  • Support for film formation
  • Control of system characteristics
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

Used in controlled formulation processes together with colourants, fillers, additives and solvents. Final performance depends on the formulation, application and curing conditions.

Areas of use

Industrial paint manufacturing and professional formulation processes involving colour and performance adjustment.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeResin-based binder
FinishSystem component
Recommended substrateProfessional coating formulation
ApplicationIndustrial dispersion and mixing equipment
Thinning / mixingRefer to the current technical data sheet
DryingDependent on conditions, substrate and film thickness; refer to the current technical data sheet
Theoretical coverageDependent on substrate and application method; refer to the current technical data sheet
Application control

Reliable results begin
with a controlled process.

For use only in a controlled manufacturing environment in accordance with a technical formulation and process plan.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.