Skip to main content
Nanomix Acrylic Thinner product packaging
Versan
coating system
Thinners and Ancillary Products

Acrylic Thinner

Stock code
NMX-THN-001

Acrylic Thinner is an auxiliary product developed to adjust the application viscosity of the corresponding coating system in a controlled manner and support professional application quality.

  • Controlled system compatibility
  • Consistent application viscosity
  • Professional surface quality
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

Its solvent balance, matched to the coating system components, helps maintain film flow, transfer to the substrate and application characteristics. Always determine the addition rate from the current technical data sheet for the matching product.

Areas of use

Thinning the relevant Nanomix paint, primer or varnish systems; equipment cleaning where expressly specified as suitable.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeSolvent blend formulated for the system
FinishSystem component
Recommended substrateCoating system and application equipment
ApplicationDosing equipment and a suitable mixer
Thinning / mixingRefer to the technical data sheet for the matching product
DryingDependent on conditions, substrate and film thickness; refer to the current technical data sheet
Theoretical coverageDependent on substrate and application method; refer to the current technical data sheet
Application control

Reliable results begin
with a controlled process.

Add gradually to the paint under controlled conditions. Once the mixture is homogeneous, check that its viscosity suits the application equipment. Do not mix different thinner types.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.