Skip to main content
Nanomix Semi-Matt Polyurethane Topcoat packaging
Versan
coating system
Polyurethane Systems

Semi-Matt Polyurethane Topcoat

Stock code
NMX-PUR-004

Semi-Matt Polyurethane Topcoat is a Nanomix coating solution developed to combine protection, an attractive finish and professional application performance on selected surfaces.

  • Consistent film formation
  • Surface protection
  • A professional final finish
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

When surface preparation, primer selection, ambient conditions and the recommended coating build are managed together, it delivers a uniform appearance and film performance appropriate to the intended use.

Areas of use

Metal, wood, mineral or industrial surfaces specified in the product technical description.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeTwo-component resin system
FinishSemi-matt / semi-gloss
Recommended substrateSurfaces prepared for the specified system
ApplicationSpray, brush or roller
Thinning / mixing15–25% polyurethane thinner
DryingTouch dry: 40–50 min · Ready for assembly: 2–3 h · Fully dry: 24 h
Theoretical coverage9–10 m²/L (30–50 µm dry film)
Application control

Reliable results begin
with a controlled process.

Apply to a sound, clean, dry and properly prepared surface using a compatible primer and thinner, observing the recommended recoating intervals.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.