Epoxyer Primer is a two-component, solvent-free transparent impregnating primer for preparing concrete floors for subsequent epoxy coating layers. Listed applications: Priming concrete floors before epoxy coatings; subject to technical confirmation, sealing to reduce dusting in areas without heavy traffic.

For concrete floors, selection starts with substrate integrity, moisture, traffic, chemical exposure and the required build. A primer, clear coating and self-levelling topcoat must not be treated as the same operation or assigned the same consumption figure. Assess concrete absorbency and surface strength on a test area. Remove weak material, oil and dust, and plan separately for cracks, joints and flatness. A coating does not replace a movement-joint solution.

Before specifying the product, provide the technical team with the substrate, existing finish, service exposure and intended application method. A representative trial helps establish adhesion and appearance; it does not replace the required system approval for demanding exposure. Slip resistance, intensive forklift traffic, persistent wetting and chemical spills can require different system designs. The term epoxy does not establish suitability for all these conditions.

The product record lists: Two-component, solvent-free epoxy binder. Preparation information: 2 parts A + 1 part B by weight; confirm any dilution in the current data sheet.

Do not infer the A/B ratio from the product name. The Epoxyer primer archive gives 2:1 by weight; a topcoat or another epoxy product's ratio must not be transferred to the primer. Add aggregate only under an approved system specification.

Check the exact product and component codes before starting. Weight and volume ratios are not interchangeable, and a packaging weight is not a mixing instruction. Where a hardener is required, confirm the ratio, induction time and usable pot life in the current technical data sheet. Record the quantities used; do not adjust a component ratio to change drying speed.

The quotation packaging preferences are: 3 kg kit; 20 kg kit. Confirm the selected pack, colour and availability at quotation stage. Kilograms describe net mass and litres describe net volume; conversion requires the density of the supplied product.

The product record lists: theoretical coverage — 2.5–3 m²/kg as a primer; confirm by trial for substrate absorbency and roughness. This is not a guaranteed site yield. Check whether the value refers to one coat, a specified film thickness, the mixed kit or the base component. Account for substrate texture, absorbency, application losses and the required number of coats.

Base the final purchase on a measured trial and the application schedule. For two-component kits, confirm the product-specific A/B split and prepare only quantities that can be used within the specified pot life. Keep unopened material in its original labelled packaging and follow the storage instructions; package size alone does not establish shelf life.

The product record lists: drying information — Dependent on conditions, substrate and film thickness; refer to the current technical data sheet. Confirm the reference temperature, film thickness and test conditions before using these values in a production schedule.

Pedestrian access, vehicle traffic and chemical exposure are separate service stages. Plan the programme using current return-to-service requirements, not merely the appearance of a dry surface.

Measure site conditions rather than relying only on the weather forecast. Substrate temperature, moisture, ventilation and the actual applied thickness can change the result. Obtain product-specific application limits and recoat instructions before work begins; do not copy temperature limits from a different resin family. Consult the safety data sheet for ventilation and handling requirements.

Assess the complete sequence, including preparation, any primer or intermediate coat, the specified product and associated auxiliary materials. The related links on this page are options for technical assessment; a shared brand or resin-family name is not proof of compatibility.

The linked archive includes an entry for this product. It is a reference for planning, not a replacement for the current batch-specific technical data sheet. The download identifies the original catalogue page numbers. No publication date or revision is specified in the supplied source, so the website review date must not be read as a manufacturer document issue date.

Request the current technical and safety data sheets using the product code and intended application. Resolve any missing mixing ratio, recoat interval, exposure limitation or document discrepancy before use. The application guide supports planning and inspection; it does not establish a certified resistance class or replace a project-specific coating specification.