Skip to main content
Nanomix Matt Polyurethane Varnish packaging
Versan
coating system
Varnishes and Wood Protection

Matt Polyurethane Varnish

Stock code
NMX-VAR-008

Matt Polyurethane Varnish is a professional protective system designed to improve surface resistance and the final finish while retaining the visible natural character of wood.

  • A film that preserves the natural grain
  • Consistent flow and levelling
  • A professional final finish
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

With appropriate surface preparation and a compatible coating system, it provides consistent flow, an attractive film and protection suited to the service conditions of wood and furniture surfaces.

Areas of use

Furniture, doors, panels, solid wood and suitable wood-based substrates.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typePolyurethane resin
FinishMatt
Recommended substrateWood and wood-based surfaces
ApplicationSpray, brush or equipment suitable for the product
Thinning / mixingWith the matching hardener and polyurethane thinner
DryingTouch dry: 1 h · Hard dry: 16–24 h
Theoretical coverageDependent on substrate and application method; refer to the current technical data sheet
Application control

Reliable results begin
with a controlled process.

Apply to a sanded, clean and dry surface following a compatible primer or sealer system. Observe the recommended sanding procedure and waiting times between coats.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.