Skip to main content
Nanomix Interior Wall Filler packaging
Versan
coating system
Interior Coating Systems

Interior Wall Filler

Stock code
NMX-INT-006

Interior Wall Filler is a surface-levelling product developed to correct imperfections before painting and provide a more uniform foundation for the topcoat.

  • Surface levelling
  • Consistent filling
  • A substrate ready for the topcoat
Request a product quotation Consult our technical team

Our sales team will confirm colour, packaging and stock options according to your project requirements.

Product characteristics

Controlled performance
for the right surface.

Used with a suitable primer system, it helps fill voids, improve surface evenness and achieve a more uniform topcoat application.

Areas of use

Filling and levelling interior concrete, aerated concrete, cement-bonded particleboard, brick, OSB, MDF, previously painted and plastered surfaces.

A complete system approach

Surface preparation, a compatible primer, the appropriate coating build and controlled environmental conditions are considered together.

Technical overview

Essential information for application planning

Values are compiled from the catalogue archive. Before application, verify them against the current technical data sheet for the relevant production batch, colour and project conditions.

System typeAcrylic copolymer emulsion
FinishSystem component
Recommended substrateMineral and other suitable building substrates
ApplicationSpatula or flexible steel trowel
Thinning / mixingReady to use; do not thin
DryingSecond coat: after 24 h
Theoretical coverageApproximately 0.6–1.5 kg/m², depending on the substrate
Application control

Reliable results begin
with a controlled process.

Apply with a spatula or flexible steel trowel to a sound, clean and dry surface. Regulate absorbency on porous substrates using a suitable Nanomix primer.

Request technical documentation
  1. 01
    Assess the surface

    Evaluate the substrate, absorbency, moisture, corrosion and existing coating layers.

  2. 02
    Prepare the substrate

    Remove dirt, grease, dust and unsound material, then establish a suitable primer system.

  3. 03
    Control application conditions

    Set temperature, humidity, mixing, viscosity and recoating intervals in accordance with the technical data sheet.

  4. 04
    Verify the coating film

    Monitor uniformity, coating continuity and curing conditions throughout application.